"Alerted.org

Summary This position is in the Aircraft Maintenance Division, General Aviation Branch, Repair Station Section, AFS-340. Responsible for applying expert knowledge of Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards governing all matters related to Maintenance or Avionics safety issues. Responsibilities Serves as Flight Standards technical expert with responsibility for the planning, development, standardization, evaluation and effectiveness of assigned air carrier maintenance or avionics programs nationwide. Rulemaking: Serves an Aviation Safety Inspector responsible for reviewing and evaluating, on a continuing basis, established rules and regulations related to assigned technical programs to assure that they have kept pace with the needs to which they were directed and that they are still reasonable, necessary, and adequate. Evaluates regulatory petitions or proposals from within or outside the agency, and recommends the development of new or amended rules, regulations, or other regulatory material, and the discontinuance of rules and regulations no longer considered necessary. Exemptions: Responsible for the preparation of Federal Register notices regarding assigned technical programs for original petitions for exemptions and analysis of technical input from other employees within Flight Standards. Also, the incumbent coordinates with other Aviation Safety and Flight Standards Organizations to develop a complete analysis and appropriate response. Since exemptions are rulemaking documents, this review may include coordination with the Office of General Counsel so that the denial, grant or disposition of petition for rulemaking will withstand a legal challenge. Technical input must be reviewed for completeness and ensure it responds to all aspects of an exemption petition. Policy Development and Implementation: Analyzes and evaluates the effectiveness of division policy in assigned programs areas to include evaluation and analysis. Develops policies, including advisory circulars, inspector guidelines, and training standards related to certification, inspection, surveillance and operation of assigned program areas. Reviews and evaluates, on a continuing basis, established rules and regulations to assure they have kept pace with needs to which they were directed and that they are still reasonable, necessary, and adequate. Assures effective coordination of assigned programs and activities with Safety Assurance offices, other organizational segments of the Division, the Agency and organizations outside of the agency. Representative to Industry, Government, and International Organizations: Participates in national and international working groups and panels with other organization elements of the agency, or other government agencies, International Civil Aviation Organization (ICAO) and industry representatives for the purpose of resolving complex and controversial problems having a direct influence on the safety of assigned technical program operations, facilities, and equipment. Develops operational policies, including advisory circulars, inspector guidelines, and training standards, and other applicable standards in support of assigned programs. Analyzes and evaluates the effectiveness of division policy in assigned program areas. Training and Outreach: May represent the agency as a technical trainer/instructor delivering formal training for assigned technical programs. Technical Assists: Provides technical support and conducts research for internal stakeholders related to a variety of issues. Requirements Conditions of Employment We are not accepting applications from noncitizens. Qualifications General Requirements for All Positions: 1. Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; 2. Valid State driver's license; 3. Fluency in the English language; 4. No chemical dependencies or drug abuse that could interfere with job performance; and 5. High school diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation. The minimum medical requirements include the following requirements: 1. Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); 2. Have the ability to hear the conversational voice (hearing aid permitted); and 3. Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. In addition, applicants for positions that require participation in the operation of the aircraft must: 1. Possess a valid second – class medical certificate in accordance with FAA regulations; and 2. Pass recurrent medical examinations as prescribed by the FAA. Applicants not requiring valid second-class medical certificates who are tentatively selected will be required to: 1. Provide documentation from a board-certified physician certifying that they meet the minimal medical requirements; or 2. Individuals who do not meet the minimum medical requirements but who are otherwise qualified will receive an individualized assessment to determine whether they can perform the essential functions of the position. Aviation Safety Inspector (Airworthiness) When the predominant work involves air carrier avionics, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Aircraft avionics experience involving the maintenance, repair, and troubleshooting of installed avionics systems on aircraft. Avionics maintenance experience on aircraft of more than 12,500 pounds maximum certificated takeoff weight. Aircraft avionics work experience (which could include supervision or auditing) in a repair station; air carrier repair facility; military repair facility; or local, state, or Federal governmental agency within the last 3 years. When the predominant work involves general aviation avionics, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Aircraft avionics experience involving the maintenance, repair, and troubleshooting of installed avionics systems on aircraft. Aircraft avionics work experience (which could include supervision or auditing) in a repair station; air carrier repair facility; military repair facility; or local, state, or Federal governmental agency within the last 3 years. When the predominant work involves air carrier maintenance, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state, or Federal governmental agency. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. When the predominant work involves general aviation maintenance, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. To qualify for this position, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS-13. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position. Specialized experience includes extensive knowledge and experience in certification, inspection, and surveillance as it relates to 14 CFR Part 145 Repair Stations. Experience in evaluating technical information and preparing technical correspondence. Ability to convey technical information to diverse audiences. Experience in conducting or supporting a Sampling Inspection System (SIS) Audit for assigned 14 CFR Part 145 Repair Stations or Repair Station located outside the United States. Experience collaborating with international regulatory authorities or FAA National/Regional Coordinators. In addition to the above, this vacancy has a Quality Ranking Factor, listed below. Applicants who meet this factor will be placed in a Well Qualified category. This factor is also listed under the Other Factors section. Extensive aviation related working knowledge and experience with Bilateral Aviation Safety Agreements (BASA), Maintenance Implementation Procedures (MIP), and Maintenance Agreement Guidance's (MAG). Qualifications must be met by the closing date of this vacancy announcement. Education High school diploma or equivalent Additional Information We may use this vacancy to fill other similar vacant positions. Position may be subject to a background investigation. A one-year probationary period may be required. The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/workinghere/financial-disclosure-requirements As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate. How You Will Be Evaluated for Internal Announcements: Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA); Demonstrated Abilities; Leadership and Management Dimensions; or Other Factors listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration. Incomplete Applications: Please ensure you answer all questions and follow all instructions carefully. Errors or omissions may impact your rating or may result in you not being considered for the job. Applicants may be asked to verify information on your application for employment with the FAA. In-grade/downgrade applications will be accepted. Links to Important Information: Locality Pay, COLA