• Inspector Operator

    Shaw Industries Inc (South Pittsburg, TN)


    Job Title

     

    Inspector Operator

    Position Overview

    INSPECTOR OPERATOR RESPONSIBILITIES FI100G Issue Date: 07/03/09

     

    Position Objective: Inspect finished board quality and mark all defects that exceed product specifications. This is done safely and efficiently with the maximum amount of production and a minimal amount of off-quality

    Essential Duties: (Considering job knowledge, job environment, effort, manipulative skill, judgment, safety knowledge and responsibility):

    1. Visually inspect all products for defects and grading according to product specifications.

    2. Mark any defects with chalk so that they are sent to the defecting department.

    3. Control line operation form portal to stacker.

    4. Communicate any off-quality concerns with technician, lead, or supervisor.

    5. Left line inspector will gather six (6) planks every twenty (20) minutes for color check.

    6. Keep machines and work area clean and free of dust.

    7. Assist technicians during changeover.

    8. Adjust the magazine at plank stacker during change over.

    9. Be familiar with all product specifications and grading standards.

    10.Other duties as assigned by Lead or Supervisor.

    11.Willing to be an On the Job Trainer (OJT)

    Non-Essential Duties: (Considering job knowledge, job environment, effort, manipulative skill, judgment, safety knowledge and responsibility):

    1. Must be a team player

    2. Take an active role in committees.

    3. Cross-training for other jobs on finishing line.

     

    Physical Requirements: 1. Must be able to bend, squat, and stoop several times a day.

     

    2. Must be able to stand for 8 – 12 hours a day.

    3. Must be able to climb stairs several times throughout the day.

    4. Must be able to assist in lifting up to 75 lbs. several times a day.

    5. Must be able to lift 35-50 lbs. on a regular basis throughout the day.

    6. Must be able to handle the stress of meeting goals and production requirements.

    7. Must be able to visualize defects in the product.

    8. Must be able to visualize color defects in the product.

    Other Requirements:

    1. Basic reading, writing, and math ability.

    2. Must be capable of learning and performing additional operations

    3. Must be capable of being trained on current computer systems and software. Training Requirements:

    1. On the job training

    2. Must have all OSHA, SAFE, SMS, and plant specific training.

    3. Training on current plant computer systems and software.

    Tool, Equipment, & Material Requirements:

    1. Safety Glasses

    2. PPE listed on JHA

    Safety & Security Requirements:

    1. Must comply with all required OSHA, SAFE, and plant specific safety rules and regulations.

    2. Refer to the Plant JHA (Job Hazard Analysis) for this job for the prevention of accidents.

    Work Shift

    10 Hr non-rotating shift, Hrs fall to in punch day, Observed Calendar, shift starts PM

     

    Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.