"Alerted.org

System Tech 1-5

Job ID: 6089062

Date Posted:May 22, 2025

POSTING DEADLINE

This position is posted until filled.

JOB DESCRIPTION

System Tech 5 Salary Grade: T05

$51.94 Union

SUMMARY:

Under limited supervision, inspects, tests, and maintains substation electrical equipment and performs other substation maintenance duties related to keeping buildings and grounds in good condition.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Inspects and tests equipment to ensure proper operation, utilizing such equipment as voltmeters, ammeters, and related electrical testing equipment

Installs and maintains substation, transmission, distribution, and metering equipment

Performs routine maintenance on substation equipment such as oil testing and replacement

Trains and instructs less experienced personnel in techniques of substation maintenance and other engineering duties by applying a full working knowledge of safe work procedures as outlined in the Safety Manual

Performs surveying and staking for new construction

Available to perform on call work as necessary

May serve as either dispatcher or switchman

Properly reports and maps substation related changes to equipment and lines

Paints, repairs, and maintains substation facilities

Performs other duties as assigned

COMPETENCIES:

Strong knowledge and understanding of electrical theory, transformer theory, math and drafting

Strong knowledge and understanding of safe and proper testing techniques

Strong knowledge and understanding of substation and line construction and maintenance

Ability to operate power tools and electrical testing equipment

Ability to recognize and communicate hazardous conditions

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

High School Diploma or GED with seven or more years of related experience completion of competency levels for System Technician 4, or equivalent combination of education and/or experience related to the discipline.

College level course work in an engineering discipline or related vocational training preferred.

Where incumbent is required to operate machinery and/or equipment covered under the State Motor Carrier Act, the incumbent must meet requirements of Part 391 of the Act (Driver Qualification) before operating such equipment.

CERTIFICATES, LICESNSE, REGISTRATIONS:

Job requirements include meeting and maintaining regulatory standards required for the position including passing any physiological qualifications required by the Department of Transportation or other agencies, and possession of a valid Commercial Driver's License. Must also have and maintain a driving record that meets the Company's standards.

COMMUNICATION SKILLS:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals

Ability to write routine reports and correspondence

Ability to speak effectively before groups of customers or employees of organization

MATHEMATICAL SKILLS:

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.

Ability to apply concepts of basic algebra and geometry

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with complex problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS:

Ability to perform physical activity associated with climbing poles, such as pushing, pulling, lifting and bending. Ability to lift, carry, and push up to 50 pounds and pull up to 75 pounds.

WORK ENVIRONMENT:

Primarily field environment.

JOB DESCRIPTION

Systems Tech 1

Union $31.68

SUMMARY:

Under direct supervision, inspects, tests, and maintains substation electrical equipment and performs other substation maintenance duties related to keeping buildings and grounds in good condition.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Assists in inspecting and testing equipment to ensure proper operation, utilizing such equipment as voltmeters, ammeters, and related electrical testing equipment

Assists in installation and maintenance of substation, transmission, distribution, and metering equipment

Assists in routine maintenance on substation equipment such as oil testing and replacement

Assists in substation maintenance and other engineering duties by applying safe work procedures as outlined in the Safety Manual

Assists surveying and staking for new construction

Assists in properly reporting and mapping substation related changes to equipment and lines

Assists in painting, repairing, and maintaining substation facilities

COMPETENCIES:

Knowledge of electrical theory, transformer theory, math and electrical schematics

Knowledge of safe and proper testing techniques

Knowledge of substation and line construction and maintenance

Ability to operate power tools and electrical testing equipment

Ability to recognize hazardous conditions

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

High School Diploma or GED with three to four years of related experience, or equivalent combination of education and/or experience related to the discipline.

College level course work in an engineering discipline or related vocational training preferred.

Where incumbent is required to operate machinery and/or equipment covered under the State Motor Carrier Act, the incumbent must meet requirements of Part 391 of the Act (Driver Qualification) before operating such equipment.

CERTIFICATES, LICESNSE, REGISTRATIONS:

Job requirements include meeting and maintaining regulatory standards required for the position including passing any physiological qualifications required by the Department of Transportation or other agencies, and possession of a valid Commercial Driver's License. Must also have and maintain a driving record that meets the Company's standards.

COMMUNICATION SKILLS:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals

Ability to write routine reports and correspondence

Ability to speak effectively before groups of customers or employees of organization

MATHEMATICAL SKILLS:

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume

Ability to apply concepts of basic algebra and geometry

Ability to read, write, and perform simple mathematical computations

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS:

Ability to perform physical activity associated with climbing poles, such as pushing, pulling, lifting and bending. Ability to lift, carry, and push up to 50 pounds and pull up to 75 pounds.

WORK ENVIRONMENT:

Primarily field environment.

\#TNMP

JOB DESCRIPTION

Systems Tech 2

Union $36.88

**SUMMARY** :

Under direct supervision, inspects, tests, and maintains substation electrical equipment and performs other substation maintenance duties related to keeping buildings and grounds in good condition.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Assists in inspecting and testing equipment to ensure proper operation, utilizing such equipment as voltmeters, ammeters, and related electrical testing equipment

Assists in installation and maintenance of substation, transmission, distribution, and metering equipment

Performs routine maintenance on substation equipment such as oil testing and replacement

Assists in substation maintenance and other engineering duties by applying safe work procedures as outlined in the Safety Manual

Assists surveying and staking for new construction

Assists in properly reporting and mapping substation related changes to equipment and lines.

Assists in painting, repairing, and maintaining substation facilities

COMPETENCIES:

General knowledge of electrical theory, transformer theory, math and electrical schematics

General knowledge of safe and proper testing techniques

General knowledge of substation and line construction and maintenance

Ability to operate power tools and electrical testing equipment

Ability to recognize hazardous conditions

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

High School Diploma or GED with four to five years of related experience and completion of competency levels for System Technician 1, or equivalent combination of education and/or experience related to the discipline.

College level course work in an engineering discipline or related vocational training preferred.

Where incumbent is required to operate machinery and/or equipment covered under the State Motor Carrier Act, the incumbent must meet requirements of Part 391 of the Act (Driver Qualification) before operating such equipment.

CERTIFICATES, LICESNSE, REGISTRATIONS:

Job requirements include meeting and maintaining regulatory standards required for the position including passing any physiological qualifications required by the Department of Transportation or other agencies, and possession of a valid Commercial Driver's License. Must also have and maintain a driving record that meets the Company's standards.

COMMUNICATION SKILLS:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals

Ability to write routine reports and correspondence

Ability to speak effectively before groups of customers or employees of organization

MATHEMATICAL SKILLS:

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume

Ability to apply concepts of basic algebra and geometry

Ability to read, write, and perform simple mathematical computations

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS:

Ability to perform physical activity associated with climbing poles, such as pushing, pulling, lifting and bending. Ability to lift, carry, and push up to 50 pounds and pull up to 75 pounds.

WORK ENVIRONMENT:

Primarily field environment.

JOB DESCRIPTION

System Tech 3 Salary Grade: T03

$39.48 Per Hour Union

SUMMARY:

Under direct supervision, inspects, tests, and maintains substation electrical equipment and performs other substation maintenance duties related to keeping buildings and grounds in good condition.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Assists in inspecting and testing equipment to ensure proper operation, utilizing such equipment as voltmeters, ammeters, and related electrical testing equipment

Assists in installation and maintenance of substation, transmission, distribution, and metering equipment

Performs routine maintenance on substation equipment such as oil testing and replacement

Performs substation maintenance and other engineering duties by applying safe work procedures as outlined in the Safety Manual

Assists surveying and staking for new construction

Available to perform on call work as necessary

May serve as dispatcher if qualified and appointed, otherwise may serve as switchman

Assists in properly reporting and mapping substation related changes to equipment and lines

Assists in painting, repairing, and maintaining substation facilities

COMPETENCIES:

General knowledge of electrical theory, transformer theory, math and electrical schematics

General knowledge of safe and proper testing techniques

General knowledge of substation and line construction and maintenance

Ability to operate power tools and electrical testing equipment

Ability to recognize hazardous conditions

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

High School Diploma or GED with five to six years of related experience and completion of competency levels for System Technician 2, or equivalent combination of education and/or experience related to the discipline.

College level course work in an engineering discipline or related vocational training preferred.

Where incumbent is required to operate machinery and/or equipment covered under the State Motor Carrier Act, the incumbent must meet requirements of Part 391 of the Act (Driver Qualification) before operating such equipment.

CERTIFICATES, LICESNSE, REGISTRATIONS:

Job requirements include meeting and maintaining regulatory standards required for the position including passing any physiological qualifications required by the Department of Transportation or other agencies, and possession of a valid Commercial Driver's License. Must also have and maintain a driving record that meets the Company's standards.

COMMUNICATION SKILLS:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

Ability to write routine reports and correspondence

Ability to speak effectively before groups of customers or employees of organization

MATHEMATICAL SKILLS:

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume

Ability to apply concepts of basic algebra and geometry

Ability to read, write, and perform simple mathematical computations

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS:

Ability to perform physical activity associated with climbing poles, such as pushing, pulling, lifting and bending. Ability to lift, carry, and push up to 50 pounds and pull up to 75 pounds.

WORK ENVIRONMENT:

Primarily field environment.

JOB DESCRIPTION

System Tech 4 Salary Grade: T04

$42.07 Union

SUMMARY:

Under general supervision, inspects, tests, and maintains substation electrical equipment and performs other substation maintenance duties related to keeping buildings and grounds in good condition.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Inspects and tests equipment to ensure proper operation, utilizing such equipment as voltmeters, ammeters, and related electrical testing equipment

Installs and maintains substation, transmission, distribution, and metering equipment

Performs routine maintenance on substation equipment such as oil testing and replacement

Trains and instructs less experienced personnel in techniques of substation maintenance and other engineering duties by applying a full working knowledge of safe work procedures as outlined in the Safety Manual

Performs surveying and staking for new construction

Available to perform on call work as necessary

May serve as either dispatcher or switchman

Properly reports and maps substation related changes to equipment and lines

Paints, repairs, and maintains substation facilities

Performs other duties as assigned

COMPETENCIES:

In-depth knowledge and understanding of electrical theory, transformer theory, math and drafting

In-depth knowledge and understanding of safe and proper testing techniques

In-depth knowledge and understanding of substation and line construction and maintenance

Ability to operate power tools and electrical testing equipment

Ability to recognize and communicate hazardous conditions

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

High School Diploma or GED with six to seven years of related experience and completion of competency levels for System Technician 3, or equivalent combination of education and/or experience related to the discipline.

College level course work in an engineering discipline or related vocational training preferred.

Where incumbent is required to operate machinery and/or equipment covered under the State Motor Carrier Act, the incumbent must meet requirements of Part 391 of the Act (Driver Qualification) before operating such equipment.

CERTIFICATES, LICENSES, REGISTRATIONS:

Job requirements include meeting and maintaining regulatory standards required for the position including passing any physiological qualifications required by the Department of Transportation or other agencies, and possession of a valid Commercial Driver's License. Must also have and maintain a driving record that meets the Company's standards.

COMMUNICATION SKILLS:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals

Ability to write routine reports and correspondence

Ability to speak effectively before groups of customers or employees of organization

MATHEMATICAL SKILLS:

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume

Ability to apply concepts of basic algebra and geometry

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS:

Ability to perform physical activity associated with climbing poles, such as pushing, pulling, lifting and bending. Ability to lift, carry, and push up to 50 pounds and pull up to 75 pounds.

WORK ENVIRONMENT:

Primarily field environment.

DOT STATEMENT

This position performs one or more covered or "safety sensitive" tasks that are regulated by the Department of Transportations (DOT) natural gas pipeline or commercial motor vehicle driver related regulations. Both types of jobs require that all individuals meet specific criteria, training, and pre-employment qualifications as defined by the DOT, which may include physical examinations and/or successful background information as required for the specific job.

SAFETY AND ADA STATEMENT

Safety Statement:

Safety is a core value at (TXNM Energy/PNM/TNMP) and our vision, "everyone goes home safe", reflects our commitment to promoting an environment conducive to learning, improving and building safety practices. Our safety value is built upon the belief that every employee deserves to work in an environment free from harm.

Americans with Disabilities Act (ADA) Statement:

If you require assistance with the job application process due to a disability, please contact HR ADA Analyst, at 505-241-4627.