"Alerted.org

Summary About the Position: In a developmental capacity, performs the more complex and intricate operations required in the missile and ordnance systems field and ensures the accomplishment of all assigned tasks in accordance with technical directives under general supervision. Promotion potential to the WG-10. Responsibilities Perform a variety of duties including assembly /disassembly, test, replacement or repair of electrical, electronic and mechanical components of missiles and ordnance systems. Perform inspection, test and exterior maintenance of components for propulsion units associated with missiles and ordnance systems. Perform missile, component, and ordnance systems testing. Record and analyze test results to determine operational status or serviceability of components. Perform fault finding diagnosis and make necessary corrections, adjustments, or repairs to ensure proper functioning of components. Disassemble missiles into major sections such as arming, guidance, and motor assemblies; assemble recertified sections, components, and equipment and set up test configurations in accordance with appropriate specifications and instructions. Replace or repair defective components using mechanical, electrical and electronic test and measurement equipment. Perform a variety of operations in the renovation, modification, demilitarization, care and preservation of ammunition and explosives, ranging from small arms up through 8" round to include mines, grenades and rockets. Destroy a variety of explosives, ammunition and propellants by detonation and burning, following a variety of procedures specific to the particular items being destroyed. Operate electric-, diesel-, or gasoline-powered fork lift trucks to move, stack and unstack, load and unload materials in and about warehouses, storage areas, loading docks, and on and off vehicles. Requirements Conditions of Employment Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications (Screen Out Element): Ability to do the work of an Ordnance Equipment Repairer (Explosives Operator/ Forklift Operator) without more than normal supervision. Assembly/disassembly, test and repair of electrical and electronic and mechanic components of missiles and ordnance systems. Experience operating automatic machines performing explosives work involving demilitarization or renovation such as pull-apart machines, delinking machines, or other renovation machines. Experience operating an electric, gasoline, or diesel powered fork lift truck.. - Failure to meet this Screen Out Element will result in an ineligible rating. Ability To Do The Work Of The Position Without More Than Normal Supervision (Screen-out Element) ABILITY TO INTERPRET INSTRUCTIONS, SPECIFICATIONS ETC. (INCLUDING BLUEPRINT READING) Ability To Use and Maintain Tools and Equipment KNOWLEDGE OF EQUIPMENT ASSEMBLY, INSTALLATION, REPAIR, ETC. Technical Practices (Theoretical, precise, artistic) Trouble Shooting Use of Measuring Instruments Physical effort: Position frequently stand, bend, stretch, and work in tiring and uncomfortable positions. Work is occasionally performed in a sitting position while making repairs at a work bench or operating test stands and consoles. Work regularly requires lifting, pushing, pulling, and carrying various sizes and shapes of components and parts weighing up to 23 kilograms (50 pounds). They occasionally handle similar items weighing up to 45 kilograms (100 pounds). Work involves lifting and working on production including standing, reaching, bending, stooping and carrying of items weighing up to 40 pounds. Manipulating parts and using machines and hand tools at rhythmic pace for extended periods . During fork lift operation, physical effort is required in braking and steering, manipulation of clutch, shift, lifting and tilting mechanisms. Working Conditions: The work is normally performed inside shop areas, with occasional outside work in areas that are sometimes noisy and drafty; however, they are generally well heated and ventilated. There is frequent exposure to cuts, bruises, shocks, burns, and injury from possible ruptured lines or component failure during high pressure testing. Repairers occasionally must wear face masks and protective clothing when there is the possibility of exposure to toxic fuels and acids, and they are occasionally required to work in close proximity to explosive components and devices.Work is performed on the demolition range and outside on ramps and storage areas when weather is often inclement. There are assignments where dirt, grease, noise, and odors are often disagreeable. Required to wear protective clothing which is specially made and treated for working on explosives; including safety shoes, glasses, gas masks, and coveralls. There is a chance of injuries ranging from loss of life to burns, cuts, bruises, sprains, and nausea. Education Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct deposit of pay is required. Multiple positions may be filled from this vacancy. This is an Ammunition Management Career Field position. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. Salary includes applicable locality pay or Local Market Supplement. Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest. Union: AFGE 2185