• Quality Control (QC) Inspector

    Navarro Inc. (Aiken, SC)


    Navarro Research and Engineering is recruiting a Quality Control (QC) Inspector in Aiken, SC.

     

    Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense.

     

    Purpose: To provide a staff augmentation service consisting of qualified Level II or III QC Inspectors to support sub-contractor oversight activities in accordance with the SRPPF Quality Assurance Program and the requirements of American Society of Mechanical Engineers (ASME) NQA-1, Quality Assurance Requirements for Nuclear Facility Applications, 2019 Edition (NQA-1–2019). The Project QC Manager will coordinate assignments based on project needs.

    Scope of Work: The staff augmented personnel will report to the Project QC Manager and perform the following activities under the direction of the assigned discipline (civil, electrical, mechanical/ piping/ welding, Instrumentation & Controls (I&C), or receipt) QC Lead:

    Oversight of Subcontractor Activities:

    + Monitor subcontractor QC activities for compliance with approved quality program, inspection and test plans (ITPs), and procedures.

    + Through surveillance, observe subcontractor inspection, test, and examination activities related to civil, electrical, mechanical/ piping/welding, I&C, or receipt, and/or non-destructive examination (NDE) disciplines.

    + Verify adherence to the current project drawings, specifications, codes, and standards.

    + Providing timely feedback to the QC Lead and the QC Manager on major issues or potential concerns.

    + Review subcontractor inspection documentation for completeness and accuracy.

    Inspection and Verification:

    + Perform discipline specific inspections and tests in accordance withthe applicable procedure and ITP.

    + Sign off on hold points and inspection records when requirements aremet.

    Documentation and Reporting:

    + Timely completion of inspection and surveillance reports inaccordance with the applicable quality procedures.

    + Sign-off of completed inspection attributes as required.

    + Generation of corrective action documents as necessary.

    + Maintaining clear, complete, and auditable inspection records.QC Inspectors shall perform activities in compliance with the applicableNQA-1, Edition 2019 requirements, including but not limited to:

    + Requirement 2: Quality Assurance Program

    + Requirement 10: Inspection

    + Requirement 11: Test Control

    + Requirement 12: Control of Measuring and Test Equipment

    + Requirement 15: Control of Nonconforming Items

    + Requirement 16: Corrective Action

    Requirements

    + Minimum of five (5) years nuclear experience performing Level II QC inspections.

    + Current certifications in one or more disciplines: civil, welding, mechanical, electrical, receipt, I&C, or NDE.

    + Code/ standard knowledge: ASME BPVC, ASME B31.3, NQA-1, AWS D1.1/ D1.6,DOE O 414 1.D and 10 CFR Part 21.

    + Demonstrate the ability to interpret technical drawings, specifications, and ITPs.

     

    Performance Expectations

    Performance will be evaluated on:

    + Performing all activities in compliance with Fluor Nuclear Safety Culturepolicy.

    + Accuracy, completeness, and timeliness of deliverables.

    + Compliance with NQA-1, Edition 2019 requirements and project procedures.

    + Effectiveness in identifying and documenting deficiencies through the projectCorrective Action Program.

    + Demonstrating professionalism in interactions with the client, subcontractors, and project personnel.

     

    Deliverables

    The QC Inspector shall provide:

    + Inspection Reports.

    + Surveillance Reports

    + Observation Reports

    + Condition Reports

    + Daily/Weekly Status Updates - As directed by the QC Manager.

     

    Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required.

     

    Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status, or any classification protected by applicable state or local law.

     

    EEO Employer/Vet/Disabled

     

    Benefits

     

    + Health Care Plan (Medical, Dental & Vision)

    + Retirement Plan (401k, IRA)

    + Life Insurance (Basic, Voluntary & AD&D)

    + Paid Time Off (Vacation, Sick & Public Holidays)

    + Short Term & Long Term Disability