"Alerted.org

Summary This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This is an Interdisciplinary (Engineer/Architect), GS-08XX-11/12 position with the U.S. Army Corps of Engineers (USACE), Little Rock District. This position is located in Little Rock, AR. For additional information on USACE Little Rock District click Here Responsibilities Maintain close contractor-government work relationships to obtain the highest possible quality in the construction project. Review contractors’ shop drawing details to determine compliance of the proposed work to the contract drawings and specifications. Perform Biddability, Constructability, Operability, and Environmental reviews of plans and specifications. Incumbent is a Contracting Officer's Representative and makes on-the-spot decisions to ensure that the contractors’ work is performed in accordance with the plans and specifications, accepted construction practices and good workmanship. Work with and may provide guidance to engineers, inspectors, and technicians who are providing quality assurance oversight of contracts. Consult and maintain liaison with representatives of the Using Service, District Office and other concerned parties regarding work progress. Requirements Conditions of Employment Qualifications Additional information about this Position: This position serves as a Project Engineer responsible for construction management and safety oversight of assigned projects. Contracts may cover a wide variety of project types such as: medical facilities, conventional buildings, dormitories, food service centers, maintenance facilities, training buildings, flood control levees and structures, relocation of roads and highways, asphaltic and concrete paving, access roads, recreational facilities, and rehabilitation or replacement of hydropower generation equipment and/or machinery. Applies a professional knowledge of engineering theory, principles, methods, and techniques related to construction along with an understanding of the various construction trades and crafts, in performing and leading on-site construction management oversight activities. Who May Apply: US Citizens In order to qualify, you must meet the experience and/or education requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: For GS-11: One year of specialized experience which includes: 1) Evaluate construction contract plans, designs, and/or design specifications; AND 2) Recording data such as quality issues, safety hazards or work progress observed during jobsite inspections of construction projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Engineering Management. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. For GS-12: One year of specialized experience which includes: 1) Overseeing contracted work to ensure its quality and compliance with plans, designs and specification; AND 2) Perform onsite inspections to ensure that all work meets quality standards and safety; AND 3) Performing contract modifications for construction projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12 level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Education Basic Requirements (for Engineers): A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Basic Requirement for (Architect):A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. ***NOTE: You MUST provide a copy of your transcripts with your application package or you will be rated ineligible.*** FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/ Additional Information This position is authorized for a Special Salary Rate for performing work directly in the generation and/or transmission of electric power for certain series and duty locations. Determination of a Special Salary Rate will be decided at time of selection. Salary Range for SSR 0755 is: $98,948 - $126,186. Management may select at the GS-11 or the GS-12 grade level. Full performance is at the GS-12. Promotion is at discretion of management. Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct Deposit of Pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is an FC18 Engineers and Scientists Career Field position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information. Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations. A Relocation Incentive of up to $10,000 may be authorized for current Federal employees. A Recruitment Incentive of up to $10,000 may be authorized for new civilian federal employee (initial appointment), or previous civilian federal employee with a break in service of at least 90 days.