"Alerted.org

Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (T32), Position Description Number D0872P01 and is part of the AL AASF 3, National Guard. ORGANIZATION: SAAO, AASF #3, MOBILE, AL SELECTING OFFICIAL: 1SG K. EVERITT Responsibilities 1. Performs operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the Air Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS) ; a logic subsystem-- the Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--, and the Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). 2. Completes operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft and performs total systems alignments in accordance with existing technical manuals and directives. Accomplishes technical manual compliance and modification of components and systems and completes systems checkout for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). 3. Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Identifies faulty parts and repairs to level authorized. Ensures and certifies operational integrity of various night vision systems, and electro-optical components. Reassembles unit after repair, performs alignment and makes shop checks. 4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. 5. When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. 6. Guides lower level mechanics in the performance of duties. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. 7. Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. 8. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Performs other duties as assigned. Requirements Conditions of Employment Qualifications MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Army National Guard. Applicants who are not currently a member of the Alabama Army National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Army National Guard recruiter at 800-464-8273 prior to applying for this position. MINIMUM MILITARY RANK: SPC MAXIMUM MILITARY RANK: SFC EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION. GENERAL EXPERIENCE: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: Must have at least 24 months of skill, knowledge, and abilities of the FWS 2610 work at the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Theatre Aviation Sustainment Maintenance Group (TASMG). Must have competencies in performing electronic integrated systems work activities on Army National Guard helicopters such as, installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining these systems. Skilled in performing operational checks, inspections, tests, and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the ARNG Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS); a logic subsystem-- Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Skilled in conducting operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Experienced in isolating unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Competent in identifying and solving problems system concerns by analyzing installation, circuitry, and operating characteristics of these systems. Skilled in adjusting and aligning sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Have technical expertise in removing faulty LRUs for shop repair. Skilled and knowledgeable in the installation of serviceable components into the aircraft and in performing total systems alignments, in accordance with existing technical manuals and directives. Accomplished in following technical manual compliance and modification of components and systems; and, and skilled in completing systems checks for proper operations. Skilled in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment (TMDE). Skilled in completing bench checks, testing, repairs, inspections, modifications, programming, reprogramming, mating, adjusting, alignments, and analyzing of LRUs and shop replaceable units. Experienced in using a variety of test equipment such as, automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Competent to test and troubleshoot solid state electronic assemblies and subassemblies such as, circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Capable to certify the operational integrity of various night vision systems, and electro-optical components. Skilled in recognizing methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data. Experienced in debriefing aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. Should have experiences as a flight crew member for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Experienced in providing instructional training to other mechanics in regard to the repair of computer controlled automatic test equipment, line replaceable units and aircraft integrated systems. Experiences included participation in various types of readiness evaluations such as, Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May have experiences in performing additional duties such as, structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or served as a member of a team to cope with natural disasters or civil emergencies. Knowledgeable in safety, fire, security, and housekeeping regulations SKILL AND KNOWLEDGE: -Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate deficiencies. -Thorough knowledge of the principles of digital and analog circuits, electro-mechanical devices, solid state devices theory, digital techniques, synchro/servo operation and integrated circuit theory. -Ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). -Ability to perform algebraic and trigonometric formulas to solve work-related problems. Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques. -Knowledge of the Army Maintenance Management System (TAMMS) and other automated programs, publications or directives as may be applicable to the function. Education SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). **This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**