"Alerted.org

Summary The Principal Maintenance Inspector (PMI) is responsible for applying substantial knowledge of and experience with Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for Federal Aviation Administration (FAA) field personnel and the public governing all matters to general aviation maintenance safety issues. Responsibilities II.DUTIES AND RESPONSIBILITIES The PMI receives administrative direction from management in terms of broadly defined missions or functions. The PMI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The PMI provides policy assistance to field level Aviation Safety Inspectors (ASIs) on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled. Some FG-14 assignments involve Service wide responsibility for application of expert knowledge of general aviation maintenance. Other FG-14 inspectors establish technical procedures and performance yardsticks and review maintenance programs, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity and the organizations monitored are major factors in the industry. ASIs at the FG-14 level establish technical procedures and performance indexes and review complete maintenance programs for general aviation organizations who are leaders in the aviation industry, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity. FG-14 employees evaluate maintenance programs for organizations which utilize complex aircraft, systems, and equipment. Because of organizational complexity or the advanced technology incorporated in the aircraft, systems, and equipment, employees must exercise originality to resolve unique problems. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation and maintenance. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy-setting level. The PMI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs. Decisions typically have broad impact on the operation or maintenance of a particular type of advanced aircraft, major air carriers, or a geographic area containing a variety of novel and/or complex aviation operations. Decisions also have a significant effect on the safety of the flying public. FG-14 employees have critically important and frequently controversial contacts with key officials of major manufacturers, major carriers, and general aviation organizations. Contacts are made to resolve issues which affect the initial certification and major modifications of aircraft, maintenance programs, and their effect on safety and compliance with regulations. The PMI provides guidance to field level staff to solve difficult technical issues. Resolves all but unique problems, with the intervention of management or a more experienced technical specialist. Develop plans, techniques, and policies to address current and anticipated problems and issues. Works with management to solve problems. Contacts are internal and external to the agency. The PMI occasionally represents the agency as a point of contact for policy development, inspection activities or as a technical trainer/instructor delivering formal training. Contacts vary significantly depending upon the purpose of the contacts, the level of authority required to resolve issues, and the nature of the technical problem at hand. Requirements Conditions of Employment We are not accepting applications from noncitizens. Qualifications OPM Qualifications Standard for Aviation Safety Series, FG-1825 Minimum Eligibility Requirements: Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; Valid State driver's license; Fluency in the English language; No chemical dependencies or drug abuse that could interfere with job performance; and High school diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation. The minimum medical requirements include the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. When the predominant work involves (General Aviation Maintenance), applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. Note - Recency of experience requirement (work experience within the last 3 years) is waived for current FAA employees in the 1825 series. Certificate and Ratings: This position requires certificates and ratings for minimum qualification in the following specialty: General Aviation Maintenance; a copy of certificates and ratings are required for ALL candidates newly appointed to the FAA in the 1825 specialty of General Aviation Maintenance. Therefore, applicants must submit a copy of their certificates and ratings unless they are currently occupying General Aviation (Maintenance) 1825 Series Position Specialized Experience: To qualify for this position you must demonstrate in your application that you possess at least one year (52 weeks) of specialized experience equivalent to the FV-I, FG/GS-13 level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position and is typically in or related to the work of the position to be filled. Specialized experience includes experience assisting, conducting, or performing various technical functions related to certification, surveillance, investigation, and enforcement activities. Additional experience may be in investigating and reporting on accidents, incidents, and violations. Qualification requirements must be met by the closing date of this vacancy announcement. As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate. Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Leadership and Management Dimensions listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration. For Lateral Movements Between 1825 Specialties: To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors. This order is located at: https://www.faa.gov/documentLibrary/media/Order/3410.26.pdf. Education Additional Information We may use this vacancy to fill other similar vacant positions. Position may be subject to a background investigation. A one-year probationary period may be required. The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/workinghere/financial-disclosure-requirements All FAA employees MUST submit their most recent Notification of Personnel Action (SF-50). See further details below. Lateral Transition between specialties: Please include appropriate Qualifications Assessment Tool (QAT). Form(s) may be uploaded to your on-line application or submitted by mail or fax. If you choose to submit the form via fax, we cannot guarantee timely receipt or assume responsibility for the quality or legibility of the form. Illegible forms will result in loss of consideration. Mailed or faxed forms should be addressed to the agency point of contact listed in this vacancy announcement. Links to Important Information: Locality Pay, COLA