"Alerted.org

Job Overview:

This position reports to the Program Manager in support of the Decontamination and Decommissioning (D&D) of facilities primarily located at the Kesselring Site and potentially the Knolls Atomic Power Laboratory, both located in upstate New York. The Technical Manager will be responsible for the preparation of policies and procedures for radiological and RCRA D&D activities under DD&R Task Order 4 at the Naval Reactors sites under the cognizance of the Department of Energy.

Key Responsbilities/Accountabilities:

+ The Technical Manager will contribute to establishing the requisite administrative requirements to enable mobilization to the site(s) and the planning of subsequent D&D activities.

+ The Technical Manager will interface with other Program staff to develop D&D strategies, coordinating and reporting to DOE and site stakeholders as appropriate.

+ This position requires the ability to write reports and procedures, participate in project meetings, present and speak in front of a group, and work in a team environment.

Basic Qualifications:

+ The position requires a minimum of five years of experience in the nuclear and/or D&D industry (working knowledge of D&D Industry standards) with a Bachelor's degree in engineering or related field of study required.

+ Experience in the fields of construction, demolition, remediation, asbestos abatement, lead abatement, lifting & rigging preferred.

+ Prior shipyard, DOE, or Naval Nuclear Propulsion Program experience strongly preferred.

+ Experience in radiological and environmental decontamination and decommissioning fields a plus.

+ Must be a US Citizen; no dual citizenship.

+ Must be able to obtain and maintain a Department of Energy Level L Security Clearance.

+ Ability to pass and maintain a medical clearance for entry into radiological areas.

+ Occasional overtime and travel may be required (infrequent).

Additional Information:

+ Relocation assistance available to those who qualify

+ Competitive salary with annual performance reviews

+ Higher compensation possible for a candidate with extensive experience and credentials.

+ Complete company benefits package

+ Company sponsored DOE clearance

+ Tuition reimbursement program available

Job Overview:

APTIM is currently seeking a junior- level Environmental Technician/Chemist/Analyst to join the project support chemical staff. The first assignment will be as a member of the team performing the field analysis for an insitu treatment project located in the Binghamton, NY area. The project is treating volatile organic compounds (VOCs) in the site soil and groundwater and requires continuous, real-time, quantitative monitoring of target VOCs within the building interior on a 24/7 basis. APTIM is deploying two Selective-Ion Flow-tube mass spectrometer (SIFT-MS™) units to cover the requirements. The SIFT-MS™ units are manufactured and will be installed by Syft Technologies, Ltd. (Syft). Each SIFT-MS™ will have multiple sample lines to provide VOC monitoring at several required points within the building. The individual hired for this position, after being provided training by Syft during the system installation process, will be expected to operate, check and/or calibrate the units with limited supervision and to using the software tools provided create deliverables including calibration/QC summaries and time-based reports of VOC concentrations detected. Typical tasks at the project will include daily quality control and calibration checks of the SIFT-MS™ units, recalibration as needed, real-time review of instrument output during normal working hours, assisting in the compilation of defined time-periods of data into monitoring reports and reporting of results to project personnel. They will also be performing other periodic air monitoring tasks such as SUMMA canister sampling, and general walk-through air monitoring. Periodic check-in via remote links of the system operation may be required after normal working hours.

At the conclusion of the project APTIM will seek to assimilate the successful candidate into its project field sampling and analytical support team performing a variety of project support tasks including field sampling, field-screening analysis, and assisting other disciplines such as quality and health and safety. Strong interpersonal skills are a must, including the ability to communicate clearly and confidently, both written and verbally, to project team members. This will be a full-time position based for 7-9 months at the aforementioned project site and thereafter as a member of a high-travel project support team in a work from home or hybrid office model at the nearest in APTIM office.

Key Responsibilities/Accountabilities:

+ Participate in assisting with the installation of the SIFT-MS™ units and the numerous sample lines planned. During this time the manufacturer (Syft Technologies) will provide training on system operation and set-up including setting up the instrument libraries and first calibrations.

+ Operate the SIFT-MS™ units per the project-specific SOPs including completion of daily QC and calibration checks, recalibration as required, and compilation/reporting of data.

+ Maintain the sample lines and trouble-shoot the SIFT-MS™ systems as necessary to maintain operation.

+ Collect additional air samples on a periodic basis via SUMMA and other passive collection methods and conduct walk-though air monitoring on an as needed basis

+ Collect environmental samples in the field from various media including groundwater, surface water, soil, and vapor.

+ Be able to perform field work at out of town or out of state locations for extended periods of time lasting up to several weeks or months.

+ Calibrate, maintain, and utilize various field monitoring and measuring instruments.

+ Apply basic technical skills and knowledge to complete assigned tasks; expected to manage own time to meet established deadlines.

+ Analyze and prepare raw data into workable form for engineering/scientific project reports, plans, specifications, permits, cost-estimates, and other project documents.

+ Work collaboratively in a team environment, provide input on technical, project, and safety issues.

+ Possess a "Safety First" work ethic.

Basic Qualifications:

+ Bachelor's degree in chemistry/environmental science or a related discipline and/or 1-3 years of experience in air monitoring using data-logging systems. Experience with environmental instrumental analysis such as gas chromatography/mass spectrometry or gas-chromatography (GC) is a plus. Experience should include setup/calibration, calibration verification, and QC sample analysis as well as interpretation of instrument output.

+ Knowledge and capability to perform minor troubleshooting and maintenance such as changing sample tubing, and experience in performing and documenting instrument calibrations and quality control checks.

+ Possess good writing skills to be able to produce error free reports.

+ Possess or be capable/willing to complete 40-hour OSHA HAZWOPER training with current 8-hour refresher certificate.

+ Ability to wear proper PPE for work on hazardous waste sites; lifting and physical work will be required.

+ Must be able to work in the field in all types of field conditions/weather.

+ Must possess a valid driver's license with a clean driving record.

+ Core competency in Microsoft Office Products, including Word and, Excel

Job Overview:

APTIM is currently seeking a mid- level Environmental Chemist/Analyst to join the project support chemical staff. The first assignment will be as the technical lead performing the field analysis for an insitu treatment project located in the Binghamton, NY area. The project is treating volatile organic compounds (VOCs) in the site soil and groundwater and requires continuous, real-time, quantitative monitoring of target VOCs within the building interior on a 24/7 basis. APTIM is deploying two Selective-Ion Flow-tube mass spectrometer (SIFT-MS™) units to cover the requirements. The SIFT-MS™ units are manufactured and will be installed by Syft Technologies, Ltd. (Syft). Each SIFT-MS™ will have multiple sample lines to provide VOC monitoring at several required points within the building. The individual hired for this position, after being provided training by Syft during the system installation process, will be expected to independently operate, check and/or calibrate the units and to using the software tools provided create deliverables including calibration/QC summaries and time-based reports of VOC concentrations detected. Typical tasks at the project will include daily quality control and calibration checks of the SIFT-MS™ units, recalibration as needed, real-time review of instrument output during normal working hours, compilation of defined time-periods of data into monitoring reports and reporting of results to project personnel. They will also be supervising a technician who will be assisting in the SIFT-MS™ operations and performing other periodic air monitoring tasks such as SUMMA canister sampling, and general walk-through air monitoring. Periodic check-in via remote links of the system operation may be required after normal working hours.

At the conclusion of the project APTIM will seek to assimilate the successful candidate into its project analytical support team performing a variety of project support tasks including sample planning, field sampling and field analysis, data review and validation, analytical reporting for project needs and scoping for and document preparation for proposals and projects. Strong interpersonal skills are a must, including the ability to communicate clearly and confidently, both written and verbally, to all project team members. This will be a full-time position based for 7-9 months at the aforementioned project site and thereafter as a work from home or hybrid office model employee at the nearest in APTIM office.

Key Responsibilities/Accountabilities:

+ Participate in assisting with the installation of the SIFT-MS™ units and the numerous sample lines planned. During this time the manufacturer (Syft Technologies) will provide training on system operation and set-up including setting up the instrument libraries and first calibrations.

+ Operate the SIFT-MS™ units per the project-specific SOPs including completion of daily QC and calibration checks, recalibration as required, and compilation/reporting of data.

+ Maintain the sample lines and trouble-shoot the SIFT-MS™ systems as necessary to maintain operation.

+ Maintain and reorder calibration and QC check materials and standards as required.

+ Manage all aspects of the onsite air monitoring program including supervision of at least one technician assisting in SIFT-MS™ operation and additional air sampling on a periodic basis.

+ Collect environmental samples in the field from various media including groundwater, surface water, soil, and vapor.

+ Be able to perform field work at out of town or out of state locations for extended periods of time lasting up to several weeks or months.

+ Calibrate, maintain, and utilize various field monitoring and measuring instruments.

+ Apply basic technical skills and knowledge to complete assigned tasks; expected to manage own time to meet established deadlines.

+ Analyze and prepare raw data into workable form for engineering/scientific project reports, plans, specifications, permits, cost-estimates, and other project documents.

+ Communication of technical concepts, evaluation results, plans, reports, etc. during work team meetings; ensures conformance to applicable technical standards as well as company policies and procedures.

+ Preparation of work plans and reports under the supervision of a senior scientist/chemist

+ Work collaboratively in a team environment, provide input on technical, project, and safety issues.

+ Possess a "Safety First" work ethic.

Basic Qualifications:

+ Bachelor's degree in chemistry/environmental science or a related discipline.

+ 2-5 years of experience in instrumental analysis, preferably in gas chromatography/mass spectrometry or gas-chromatography (GC) on environmental samples utilizing industry-standard data systems and quantitation software or complex air monitoring equipment such as auto-logging meters. Experience should include setup/calibration, calibration verification, and QC sample analysis as well as interpretation of instrument output.

+ Knowledge and capability to perform minor troubleshooting and maintenance such as changing sample tubing, and experience in creating standards from stock solutions and maintaining compliant documentation.

+ Knowledge/experience in calibration curve and QC acceptance criteria and in general reporting of data/results.

+ Knowledge/experience in environmental analytical quality control requirements

+ Possess good writing skills to be able to produce error free reports.

+ Possess or be capable/willing to complete 40-hour OSHA HAZWOPER training with current 8-hour refresher certificate.

+ Ability to wear proper PPE for work on hazardous waste sites; lifting and physical work will be required.

+ Must be able to work in the field in all types of field conditions/weather.

+ Must possess a valid driver's license with a clean driving record.

+ Core competency in Microsoft Office Products, including Word, Excel, and PowerPoint

+ Strong written and oral communication skills

+ Experience in leading technical teams and supervising technical staff.

About APTIM

APTIM enhances the quality of the environment, wellbeing of people, resilience of communities, and opportunity for employees to make a difference, not just a living. A leading professional solutions firm, we specialize in environmental, sustainability, resilience, and infrastructure solutions. Our team of experts provide these integrated solutions for forward-thinking government agencies, commercial and industrial clients, and energy customers. Together, we create sustainable and resilient communities for all.

What you can expect from APTIM:

+ Work that is worthy of your time and talent

+ Respect and flexibility to live a full life at work and at home

+ Dogged determination to deliver for our clients and communities

+ A voice in making our company better

+ Investment into your personal and professional development

As of the date of this posting, a good faith estimate of the current pay range for this position is $114,000-$130,000 ($54.80-$62.50 hourly). Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM.

Employee Benefits

APTIM Federal Services, LLC is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace https://aptim.makeityoursource.com/ .

+ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and several carriers to find the right benefits that work for them in their location.

+ Company paid and optional Life insurance

+ Short-term and long-term disability insurance

+ Accident, Critical Illness, and Hospital Indemnity coverage

+ Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law)

+ 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here:

+ APTIM 401(k) Guide (https://aptim.makeityoursource.com/getattachment/427b25cf-c3d5-43c1-97af-a3c3f474a136/APTIM-Corp-401(k)-Guide.pdf)

+ APTIM - Helpful Documents

Watch our video:

About APTIM - In Pursuit of Better

Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled

Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may make their request known by e-mailing [email protected] or calling 855.343.5600 for assistance.

EOE/Vets/Disability